Underfloor temperature control

The advanced functional principle of underfloor heating:

Underfloor temperature control uses the floor space of a room. This large surface means that you feel the same level of warmth at a lower temperature than a conventional radiator. The small difference in temperature between the floor and ambient air makes rooms extremely cosy.

The benefits of underfloor temperature control:

Great level of comfort thanks to even distribution of warmth
Economical as a result of high energy efficiency
Quick reaction time
Air hardly dries out
No dust circulation
Especially suited to partial surfaces

Easy to lay

with hot-water underfloor temperature control used as an example

Step 1:

A clean and level surface is required so that you can lay the fibre mats. To do this, place the heating mat at one side of the room and roll it out.

Step 2:

When you get to the end of the room, cut through the fibre material to which the heating lines are attached, fold the rest of the mat over to the side, attach it and roll it back in the opposite direction. There should be a gap of 8 cm between the individual lanes.

Step 3:

Now connect the heating lines to the existing central heating system and check that everything is properly sealed.

Step 4:

To finish off, fill in the mat with flexible, pourable bed mortar to create a flush surface (tiles) or cover with 5 mm of filler (other surfaces).

Perobe’s underfloor temperature control systems

Hot-water underfloor temperature control

for connecting to existing heating systems and suitable for all surface coverings

Your benefits:

Ideal for renovations
Fibre mats with integrated heating tubes
Low construction height (tube diameter of 8 mm)
Easy to install
Can be used on all surfaces suitable for underfloor heating
Can be connected to a regulator over an area of up to 15 m²

Find out more about hot-water underfloor temperature control

Electric underfloor temperature control

for connecting to existing power supplies and suitable for all surfaces

Your benefits:

Ideal for renovations
Fibre mats with integrated heating lines
Low construction height (line diameter of 2.8 mm)
Needs-based control
Easy to install
Can be used on all surfaces suitable for underfloor heating
Energy consumption 160 watts/m²
Can be connected to a regulator over an area of up to 15 m²

Find out more about electric underfloor temperature control

Electric temperature control film

for connecting to existing power supplies and suitable for parquet and laminate floors

Your benefits:

Heating film ideal for renovations
Low construction height (film measures 0.4 mm plus insulation, e.g. 5 mm of XPS)
Needs-based control
Easy to install
Can be used on all parquet and laminate floors suitable for underfloor heating
Can be connected to a regulator over an area of up to 15 m²

Find out more about the electric temperature control film